National average costs range from $500 to 5,000. The national average costs for a septic tank installation or to replace aging septic system depend on several factors.
|Septic Tank Installation||Average Costs|
|National Minimum Cost||$500|
|National Maximum Cost||$5000|
|National Average Cost||$1500|
One in five homes in the United States relies on a septic system for wastewater management, according to the Environmental Protection Agency (EPA). If you use a septic system, it may be for your individual house, or you may be plugged into a community septic system that serves a small group of properties. A septic system is an on-site treatment system for the wastewater generated by a home or business. Sewage lines carry wastewater from your shower, toilet, sinks, clothes washer and garbage disposal out of the house and into a septic tank buried in the yard. In the septic tank, the heavier solids separate from the floatable matter and the remaining liquid drains out from the tank through a series of perforated tubes into a drain field or leach field. As the liquid filters down through the soil, dangerous bacteria is removed, making the water safe once more.
Septic systems are commonly used in rural areas that do not have a centralized city sewer system. Septic systems can be installed during new construction of a home or building, or they can be replaced by removing an existing tank and installing a new one. Tank capacity ranges from under 1,000 gallons to 2,000 gallons or more, with the amount of water you use on a daily basis determining the size of tank you need. Homeowners can either provide the materials for a new septic system themselves or ask a septic system professional to provide them. Septic system installation or replacement is available for condos, apartments, homes, commercial spaces and other buildings.
The accessibility of the current septic tank or the site of the new system affects the cost of installation. For example, if the proposed site is under a concrete driveway, that driveway may need to be demolished and removed, which will add to overall costs. If the workers must navigate around a large tree with an extensive root system, costs will also likely increase. Extremely rocky soil can also affect cost, as can overly wet soil or other adverse soil conditions. The longer the crew and an engineer needs to be onsite preparing your land for installation, the higher your costs will be.
Residential septic tanks typically range in size from 800 to 1,300 gallons with most people opting for a 1,000 gallon tank. According to and Son Plumbing in Deerfield Beach, Florida, this size is good for an average two- to four-bedroom home. The price of septic tanks increases with the holding capacity of the tank. A two-bedroom house can meet its needs with an 800-gallon tank because the household has less wastewater to process on a daily basis than a four-bedroom home, which might need a 1,200- or 1,300-gallon tank. Septic tanks continually self-clean, so getting a bigger tank doesn't mean homeowners can avoid maintenance for longer. Don't buy a 3,000-gallon tank for your condo thinking you won't have to take care of the system as often.
Tanks may be made of concrete or plastic. Plastic tanks are less expensive than concrete tanks and are easier to move and install. However, plastic septic tanks are not authorized for use in all states and, disturbingly, can rise up to the surface of the soil if not properly installed. The septic tank you choose is a critical part of your home water system, so don't base your decision on price alone. Do your research and take advice from the professionals about the best tank size and type for your household needs. Here are some examples of the average cost of septic tanks:
In addition to expert knowledge of code and installation techniques, plumbing companies that install septic systems need heavy machinery when working with concrete tanks. and Son Plumbing has a backhoe tractor that crews use to prepare the earth and dig the hole at the installation site. An average concrete septic tank can weigh 8,000-12,000 pounds, depending on gallon capacity. and Son Plumbing secures the tank to the backhoe, carries it to the installation site and lowers it into the ground. According to and Son Plumbing, there are many variables to a proper installation. The ground at the base must be level, and if the tank is not installed correctly the first time, it must be repositioned. If it rains during installation, the wet ground can pop a tank out of place and it will have to be reinstalled. Installation costs often depend on the business and operating costs of owning an $80,000 (or more) backhoe tractor.
Installing a new system or replacing an existing system can take two to five days for a local contractor to complete usually three days on a typical job. Wet weather, extenuating soil circumstances (such as tree roots) or site inaccessibility can extend the installation by a few days. Prices for installation vary depending on the type of septic tank (concrete or plastic), the size of the tank, the cost of labor in the region and any additional prep work that must be done to prepare the ground for installation. and Son Plumbing charges an average of $9,000 to remove an old tank and install a new system. Some jobs have cost as much as $12,000 because of problems at the site such as tree roots.
The recommends that property owners have their septic tank pumped every three to five years. A licensed plumber can pump out the tank without having to remove it from the ground. According to the EPA, 'If the bottom of the scum layer is within six inches of the bottom of the [tank] outlet or if the top of the sludge layer is within 12 inches of the outlet, your tank needs to be pumped.' and Son Plumbing charges $300-$500 to pump a septic tank.
In some cases, the house or septic tank is lower than the drain field and a lift station is required. A lift station is a type of pump that kicks on when the waste in the tank reaches a set level. This mechanism ensures that wastewater continues to flow out of the tank and into the drain field, keeping the operating system working properly regardless of gravity. 'We see the need for more of these in the Miami area, where the homes are lower in elevation than their backyards,' say the experts at and Son Plumbing. The company charges an additional $3,000-$5,000 to install a lift station.
For steep sites, extremely rocky ground or bad soil, alternative systems work well. These include aerobic septic systems, mound septic systems, raised-bed septic systems and others. Depending on the location and type of system, costs may be higher or lower than the average septic system installation or replacement.
A properly installed and well-maintained septic system keeps you, your family and your neighboring community safe. When a septic system fails, harmful even dangerous disease transmission can occur as contaminated water spreads through the soil and waterways. Understanding how your newly installed septic tank operates will help you keep it in good working condition. Here is how a septic tank system works, as outlined by the
No one wants sewage water bubbling up through their front yard during the hottest day of summer (or even on the coldest day of winter). Wastewater is not only stinky and gross, it's dangerous, carrying protozoa, bacteria (such as E. coli) and viruses that can be transmitted through fecal matter. If your septic system is leaking, overburdened or damaged, dirty wastewater can leach through the soil to contaminate the water you and your friends and neighbors drink. Whole communities can become ill if there is a major wastewater problem. Knowing what signs to look for can help prevent a problem before it begins. The first step to a happy septic system is proper maintenance, which includes having your septic tank pumped every three to five years by a professional. If your septic system is not regularly cleaned, it can clog and lead to failure.
Other signs can alert you that it's time to call your septic system professional ASAP to either repair or replace the system. The State Department of Health says that red flags include water and sewage from your toilets, drains and sinks that is backing up into your home; drains in your bathtubs, showers and sinks that are draining too slowly; gurgling sounds in your plumbing system; pooling water or damp spots visible near or above the septic tank or drain field; a bad smell around the septic tank or drain field; suspiciously lush grass (from all that ahem fertilizer) over the septic tank or drain field, even during dry weather; algal blooms developing on nearby ponds or lakes; and high levels of nitrates or coliform bacteria (found in fecal matter) in your water well when you test it. There may be many reasons your septic system is failing, but, according to Washington State DOH, some common causes are clogged pipes running from the house to the tank, blockage to the inlet baffle to the tank, failure of the drain field, or a clogged outlet baffle or effluent filter.
A septic system is a big investment. And while fixing your septic system may not be as aesthetically pleasing as repainting your house or remodeling your kitchen, the joys of clean, healthy drinking water are impossible to beat. Because the cost of a septic tank and the installation process will run you into the thousands, it's important to do your due diligence when hiring a pro. Hiring an experienced and qualified professional can prevent major problems like system failure or your tank popping above ground, which can result from a poorly done installation.
When beginning your search, determine whether your state requires septic tank installers to have a contractor license. In California, a sanitation system contractor license is required to perform this type of work. Always check the contractor license number against the state database to ensure the contractor's license is valid and up to date, and that no formal complaints have been filed against them. You'll also want to check whether your regional government has any licensing requirements for this type of work. Next, read reviews! Find a company that has a solid background and has been in business long enough to give you the confidence that if something goes awry, they'll be around to fix it. Call up to three installation professionals to give you quotes, and have them provide a clearly written estimate that includes information on your tank size and type, details of the pipes and drainfield, and any other particulars. Never pay the pro in full upfront. Many require a deposit to begin. You will also want a clearly written contract that includes each detail of work, cost, installation information (depth and placement of tank, etc.), labor and product warranty, and projected completion date. Good communication will help ensure a positive experience.